VZAccess 2.0 Mac Critical Registration Bug |
| Saturday, 25 February 2006 | |
Today (2/25/2006) when we first inserted our Kyocera KPC650 in our PowerBook 15 inch, we were greeted by a message asking us to register our VZAccess 2.0 software. We have NEVER seen this dialog before today (probably using VZAccess 2.0 for 45 days or so). So we clicked the Register Later. That did NOTHING. So, we decided to register, we filled in all the information, and clicked Register. The only problem, we were not connected to the internet, AND the registration failed. Luckily, we were near a hotspot, so we connected and registered and then we saw:  So, we disconnected from the hotspot, turned off Airport and then launched VZAccess 2.0 for Mac. We got in the same loop, asking us to register. Uh no, we cannot connect using VZAccess 2.0. So, there is a critical bug in the registration module for VZAccess. Once, Verizon & Smith Micro are aware of this, I am sure there will quickly be a fix. Until there is a fix, here is the solution: Use Internet Connect to connect. Use the NationalAccess-BroadbandAccess location that VZAccess automatically creates for you. We are connected right now updating this on EVDOinfo, using Internet Connect to have our KPCX650 connect (skipping VZAccess - which is the only way our card will work until there is a fix for this bug). If you purchased your Kyocera KPC650 from us and are having troubles, email us at support@EVDOinfo.com and we will send you additional information on this and how to resolve it. Related Articles: |
|
| Last Updated ( Monday, 25 September 2006 ) |
| < Prev | Next > |
|---|
Mac EVDO
